Folded copper cuff bracelet with hammered design elements and patina coloring.  Cuff measures 1-1/2 inches wide and is sized for a medium wrist.

12010 –  Square copper pendant (1-1/2″ x 1-1/2″) with a fat bird etching suspended on a 16″ copper chain with a lobster claw clasp and a 2″ extender.   The pendant is offset with 2 turquoise stones (13mm x 8mm) and tiny copper butterfly beads.

Copper inspirational cuff bracelet with etched design elements and patina coloring.  Cuff measures 1-1/2 inches wide and is sized for a medium wrist.  The etching  says “Make It Happen” and is intertwined with leaf designs.

Brass inspirational cuff bracelet with etched design elements and patina coloring.  Cuff measures 1-1/2 inches wide and is sized for a medium wrist.  The etching  says “Love  Hope  Dream ” and is intertwined with water bubbles.

12031 – Copper bracelet with inspirational theme saying “Sail Away” heavily etched into the copper.   Bracelet measures 5/16 inches wide.  You may contact me with your own special inspirational theme to be etched onto the bracelet.    Please limit your request to less then 12 letters.  This bracelet is made out of recycled copper tubing from a refrigerator water line.

12031 – Copper bracelet with stars etched into the copper.   Bracelet measures 5/16 inches wide.  This bracelet is made out of recycled copper tubing from a refrigerator water line.

Viking knit chain woven with copper wire and interwoven with gold beads finished with copper cone end caps and a copper magnetic clasp.   The chain measures approximately 18 inches.

Necklace of bent and hammered copper rectangles with flat round  turquoise beads connected with large copper rings and fastened with a copper lobster claw clasp.   The necklace measures approximately 14 inches.   This necklace comes as a combo with a matching bracelet of hammered copper rectangles and smaller round turquoise beads which is 6-1/2 inches long and fastens with a copper magnetic clasp.

Silver and brass riveted necklace featuring a star design and a double chain to enhance the look of this handcrafted necklace.    The basic pendant is a square measuring  1-1/2 ” x 1-1/2″.

Copper pendant shaped in the state of Montana featuring “Home” etched into the metal with a Grizzly Paw designating Western Montana as the favorite location.      Of course the ‘Grizzly paw’ could be relocated to anywhere in the state that would reflect your hearts’s favorite location.  The larger Montana symbol measures approximately 2-1/4″ x 1-1/4″ hanging on a chain approximately 20″ with a lobster claw fastener.  The smaller Montana symbol measures approximately 1-1/4″ x 3/4″ hanging on a chain approximately 16″ long with a lobster claw fastener.

Copper pendant shaped in the state of Montana featuring “Home” etched into the metal with a riveted flower designating Western Montana as the favorite location.      Of course the ‘flower’ could be relocated to anywhere in the state that would reflect your hearts’s favorite location.  The Montana symbol measures approximately 2-1/4″ x 1-1/4″.   The chain is highlighted with 3.5mm turquoise beads and measures approximately 18″ with a barrel fastener.

This necklace celebrates the butterfly.  It is made of  bronze PMC on a double chain with a 3″ extension.

cutting, sanding, etching and drilling, hascreated a pendant in the shape of Montana.   The pendant can have a variety of symbols that tug on your heart.     I have etched “Home” into this samples    It has a heart located in a place that designates Western Montana.   Other options would be a “Grizzly Paw” and a “flower”.   Of course the heart, paw or flower could be located in the part of the state that is special to you.    Of course, each pendant will be slightly different since I am cutting and shaping the metal by hand.   A larger version of the pendant measure approximately 2-1/4″ x 1-1/4″ and is featured on chain that is18″ to 20″ long.   The smaller version measures approximately 1″ x 1/2″  on a shorter chain.

Once again I have gone searching for copper that can be repurposed.    Electrical copper wire can become a very fun pendant.   I have shaped the wire into hearts.   It seems that no two ever look alike.   The wire twists and turns and becomes its own design.   Applying heat and hammering also creates different color and surface effect to enhance and change the look of the wire.   Each of the hearts displayed can be hung on a chain to become a necklace.  (chain included)   Enjoy my version of the copper heart.

Recycled electrical copper wire shaped into circles.   It seems that no two ever look alike.   The wire twists and turns and becomes its own design.   Applying heat and hammering also creates different color and surface effect to enhance and change the look of the wire.   Each of the circles displayed can be hung on a chain to become a necklace.  (chain included)  Enjoy my version of the copper circle.

This bracelet will be custom made to fit your style.   The State of Montana is etched in copper with the bracelet being either a chain with toggle clasp or a leather cuff.   The etching within the State can vary.   For example “406” or “Home” can be replaced with a variety of designs or left blank.   Examples of other choices would be “Love”, or a  “Heart symbol” with a limit of five letters or symbols.  Your choice must be specified at the time of placing the order.

This image is created using wrapped and pounded copper wire and hangs on a 16″ chain.